-
Call Us 02476 356 161
-
Email Us sales@litecast.co.uk
-
We're Open Mon-Fri 8AM to 5PM
Floor Designer
Design Your Floor Your ReferenceDisclaimer
It's assumed that there are no block partitions over the floor or any other load.
SVP and any other service risers may need repositioning to accommodate the beam layout.
- First give your design a name. This will appear on any correspondance you receive from us.
- Then select the unit of measurement you want to use when entering wall dimensions. Our drawings will always use millimetres.
- Then specify the floor type, screed depth and load type. Not all combinations are valid. If you pick an invalid combination you'll get a warning message.
Errors/Warnings
Do you know the thickness of the walls that the beams will be bearing onto?
We'll use a default of 300mm if you don't.
- First specify the thickness of your walls. Choose a predefined width or select Custom to specify individual leaf and cavity widths.
- Then specify the internal length and width of your floor.
- First specify the internal length and width of your floor.
- When you're satisfied with the dimensions of your floor click
- You should now identify any walls that are part of an existing structure (if applicable). Do this by clicking one or more walls in the drawing.
- When finished click
- You should now identify any service pipes.
- Click the floor area to add a pipe. Click a pipe to select and amend it.
- When finished click
- Alternatively, go back to a previous stage by clicking one of the links above.
- You should now select a starting wall for the beam layout. Do this by clicking one of the walls in the drawing.
- Typically you would select the shortest wall.
- Once you're satisfied with your design, add it to your basket by clicking
- Alternatively, go back to a previous stage by clicking one of the links above.
- Your design is now complete.
- You may amend the design by clicking one of the links above.
- You may amend the floor type, screed depth and load type without starting again but please note that your basket will not be updated until you click
Do you know the thickness of the walls that the beams will be bearing onto?
We'll use a default of 300mm if you don't.
- Specify the thickness of your first wall. Choose a predefined width or select Custom to specify individual leaf and cavity widths.
- Then specify the internal length and angle of the wall.
- Specify the internal length and angle of the first wall.
- When you're satisfied with the dimensions of this wall click
- Now continuing anti-clockwise, specify the next wall.
- It looks like the shape of the floor could be closed by this wall. Rather than specify the length and angle of the wall yourself, click
- Walls are listed below and may be amended.
- When you're satisfied with the dimensions of this wall click
- You should now identify any walls that are part of an existing structure (if applicable). Do this by clicking one or more walls in the drawing.
- When finished click
- Alternatively, go back to a previous stage by clicking one of the links above.
- You should now identify any service pipes.
- Click the floor area to add a pipe. Click a pipe to select and amend it.
- When finished click
- Alternatively, go back to a previous stage by clicking one of the links above.
- You should now select a starting wall for the beam layout. Do this by clicking one of the walls in the drawing.
- Typically you would select the shortest wall.
- Once you're satisfied with your design, add it to your basket by clicking
- Alternatively, go back to a previous stage by clicking one of the links above.
- Your design is now complete.
- You may amend the design by clicking one of the links above.
- You may amend the floor type, screed depth and load type without starting again but please note that your basket will not be updated until you click
Walls Specified
Editing a wall will cause any following walls and all pipes to be removed
Editing a wall will cause any following walls and all pipes to be removed
| Length | Thickness | Angle | |||
|---|---|---|---|---|---|
| mm | mm | ° |
|
||
Your Basket
ReferencePlease note that these prices do not include delivery
| SKU | Unit Weight | Unit Price | Quantity | Line Weight | Line Price | |||
|---|---|---|---|---|---|---|---|---|
| kg |
|
kg | ||||||
| Drawing | kg | |||||||
| kg | kg | |||||||
| Ancils | ||||||||
| kg |
|
kg | ||||||
| Optional Ancil Block Products | kg | |||||||
| kg |
|
kg | ||||||
| Review Quotes | ||||||||
Use the Web Shop or Floor Designer to add items to your basket
Totals
| With Blocks | ||
|---|---|---|
| Total Weight | kg | kg |
| Total Price (ex. VAT) | ||
The weight of the items in your basket exceeds one delivery load. Please contact the office to discuss your requirements.